"CQuartz Dlux is the most advanced plastic restoration coating available today! Made from quality high-grade organic silane, contains more than 50% pure silica! Unlike other trim products CQuartz Dlux restores and protects plastic for two years or longer utilizing a unique nano composition which allows it to chemically bond to the pores of plastics! Additionally it is HIGHLY resistant to extreme temperatures making it the perfect companion for protecting wheels. Traditional products wash off in a matter of weeks or months but CQ Dlux has been tested all over the world and continues to protect for month after month!
DLUX Long Life Trim Coat was engineered specifically for coating plastics as well as rubber and metal. It can be used on almost any wheel finish including clear coated, chrome, aluminum, and plastic.
Features:
- Resistant to temperatures in excess of 800F
- Incredibly simple to apply on textured plastics
- Provides excellent UV protection to all exterior substrates
- Versatile, effective on plastics, wheels, and rubber surfaces!
- Average consumption for 4 wheels and all plastic trim = 10ml
Recommended surfaces:
- Engine Bay
- Plastic Trim
- Wheels
- Tires
- Rubber Trim
- Metal Trim
- Headlights, Fog lights, & Tail lights
- Exhaust Tips
- Plastic Wheel Wells
- Chrome
Kit Includes:
(1) CarPro CQUARTZ DLUX and Rubber Coating 30ml.
(4) 4″x4″ Suede MF applicators
(1) Foam Block Applicator
(3) 2″ Dia. Cotton Applicator Pad
(2) Large Foam Swabs
(1) Mini-Swab
Directions for Plastic:
1. Make sure the surface is cool and dry. (Do not apply to hot surfaces or in direct sun!)
2. Scrub surface with an all purpose cleaner and microfiber towel
3. Rinse while agitating with microfiber towel to remove all residue from APC
4. Dry or allow to dry completely.
5. Wipe surface with Carpro Eraser, remove eraser, and allow plastic to evaporate 10-20 minutes before applying
6. Wet the applicator with a strip of DLUX and spread evenly across a small area at a time
Directions for Textured Plastic:
1. When applying it is VERY important to work one area in even as you go.
2. Start in one corner and work out! / Don’t take on a huge area at once.
3. Apply evenly as you go. Do not try to spread too thin, but be sure to work it to an even coat in the first minute before moving to the next overlapping area. After a minute you should not be going back over an area that was applied.
4. On Textured trim do not wipe it off, just be sure you apply evenly as mentioned.
* On smooth plastic you gently wipe it to an even coat before it becomes too sticky. This results in a thinner coat that doesn’t last as long, but on smooth plastic there is not an easy way to apply it evenly.
Directions for Paint & Chrome:
1. Wash thoroughly
2. Decontaminate with CarPro Iron X
3. Polish surface as needed
4. Wipe down with CarPro Eraser
5. On rims (metal, chrome, clear coat, etc) let cure 1 minute at 85 degrees F up to 10 minutes at 50 degrees F and use a suede MF to wipe it off gently, in a circle motion until no marks are left
Precautions:
Allow to cure 1-3 hours without water being introduced to surface. If wet during first 24 hours wipe off water before it dries on surface as a precaution.
After 3 days you are free to wash with all your regular car washes.
Avoid contact with skin and eyes
Wear gloves
Never allow highly alkaline (ph11+) chemicals to sit or dwell on the surface for extended periods. This may affect the coating.
Do not use for other purposes
Keep out of reach of children
Keep away from heat
Do not ingest"
DLUX Long Life Trim Coat was engineered specifically for coating plastics as well as rubber and metal. It can be used on almost any wheel finish including clear coated, chrome, aluminum, and plastic.
Features:
- Resistant to temperatures in excess of 800F
- Incredibly simple to apply on textured plastics
- Provides excellent UV protection to all exterior substrates
- Versatile, effective on plastics, wheels, and rubber surfaces!
- Average consumption for 4 wheels and all plastic trim = 10ml
Recommended surfaces:
- Engine Bay
- Plastic Trim
- Wheels
- Tires
- Rubber Trim
- Metal Trim
- Headlights, Fog lights, & Tail lights
- Exhaust Tips
- Plastic Wheel Wells
- Chrome
Kit Includes:
(1) CarPro CQUARTZ DLUX and Rubber Coating 30ml.
(4) 4″x4″ Suede MF applicators
(1) Foam Block Applicator
(3) 2″ Dia. Cotton Applicator Pad
(2) Large Foam Swabs
(1) Mini-Swab
Directions for Plastic:
1. Make sure the surface is cool and dry. (Do not apply to hot surfaces or in direct sun!)
2. Scrub surface with an all purpose cleaner and microfiber towel
3. Rinse while agitating with microfiber towel to remove all residue from APC
4. Dry or allow to dry completely.
5. Wipe surface with Carpro Eraser, remove eraser, and allow plastic to evaporate 10-20 minutes before applying
6. Wet the applicator with a strip of DLUX and spread evenly across a small area at a time
Directions for Textured Plastic:
1. When applying it is VERY important to work one area in even as you go.
2. Start in one corner and work out! / Don’t take on a huge area at once.
3. Apply evenly as you go. Do not try to spread too thin, but be sure to work it to an even coat in the first minute before moving to the next overlapping area. After a minute you should not be going back over an area that was applied.
4. On Textured trim do not wipe it off, just be sure you apply evenly as mentioned.
* On smooth plastic you gently wipe it to an even coat before it becomes too sticky. This results in a thinner coat that doesn’t last as long, but on smooth plastic there is not an easy way to apply it evenly.
Directions for Paint & Chrome:
1. Wash thoroughly
2. Decontaminate with CarPro Iron X
3. Polish surface as needed
4. Wipe down with CarPro Eraser
5. On rims (metal, chrome, clear coat, etc) let cure 1 minute at 85 degrees F up to 10 minutes at 50 degrees F and use a suede MF to wipe it off gently, in a circle motion until no marks are left
Precautions:
Allow to cure 1-3 hours without water being introduced to surface. If wet during first 24 hours wipe off water before it dries on surface as a precaution.
After 3 days you are free to wash with all your regular car washes.
Avoid contact with skin and eyes
Wear gloves
Never allow highly alkaline (ph11+) chemicals to sit or dwell on the surface for extended periods. This may affect the coating.
Do not use for other purposes
Keep out of reach of children
Keep away from heat
Do not ingest"